{{project.name}}
Configuration
You can choose if you want to use the 16khz model or the 44.1khz model.
You can also modify the SDR, but beware that the model may behave unexpectedly. If you want to use the default SDR, let the SDR field be -1.
You can also modify the SDR, but beware that the model may behave unexpectedly. If you want to use the default SDR, let the SDR field be -1.
Decode Message
You can test if the model is able to decode the current project by clicking on decode audio button.
If you want to decode an audio from a different project, click on the Decode button on the top-right.
If you want to decode an audio from a different project, click on the Decode button on the top-right.
Signal to Noise Ratio
{{project.sdr}}dB
Embed a message
You can embed a 40 bit message inside the audio file.
The message is of the format: A-B-C-D-E, where A, B, C, D, E are numbers which lie in the range of 0-255 (both included)
The message is of the format: A-B-C-D-E, where A, B, C, D, E are numbers which lie in the range of 0-255 (both included)